An electrical micro motor dental unit is available in single pieces or in combination with an ultrasound scaler. With the help of this unit, you can polish or cut. It is less expensive in comparison to an air driven unit. In addition to that, it is small, mobile, and compact. On the other side, the torque is high and it is considered to be an advantage while polishing, but a cause of concern for drilling issues is that it cannot be removed like bones.
Why Micro Motor Dental Unit?
The main objective of a micro motor dental is to ensure that the patients get the care they need, and this includes the dental micro motor. With this equipment, you will come across a handheld polishing or a form of cutting device where the user is provided with flexibility and power. A motor drives it in the first place. Though the basic set up in case of most micro motors is the same, dentists are known to choose from a variety of angles along with speeds of the devices. To reach the simple areas, straight hand devices are available, but to confer with the diverse areas, you can reach out to contra-angled heads.
The standard micro motor is the range of 35000 rpm, but you can come across high-powered motors to the tune 50000 rpm. Dentists who already possess the device normally prefer the stand alone micro motor pieces whereby the same unit can perform a variety of tasks. When such a device is purchased, it ensures a professional approach at the end and in the process brings a smiling face.Micro Motor Dental
Positives Along with Negatives Associated with an Electrical Dental Piece
Let us have a look at the pros and cons of an electrical dental piece in comparison to an air driven one. The major advantages of an electric one is the smooth operation, continuous torque along with low noise levels. As less torque is offered, the noise along with vibration levels reduces considerably. A wide variety in terms of speed with reverse and the forward option is provided. With proper attachments, these drills go on to provide greater flexibility.
However, some doctors have harsh words. Since it is heavy or large, it can have an impact on the fatigue levels. In terms of cost, it is on the expensive side as well as repair when you compare it to the air driven ones. Say, for example, the cost of repairs relating to an electric drill can mount to $600.00 per unit. In fact, a learning curve is needed to use them in a proper manner.
In comparison, the air driven ones have speed up to 400,000 rpm. On the other hand, the traditional ones have speed up to 40,000 rpm. As the speed of the motors is on the higher side, the manufactures of these devices are not keen on marketing them as high-speed drills. They are marked and sold as a gross reduction item.
The electric motor units are not known to satisfy the infection requirements. However, there are some micro-units, which can withstand the autoclave. When you are about to purchase a new one does ensure that the fact that the user has gone on to comply with the concept of the dental unit waterline. You need to have an idea about the replacement parts of an electrical component. Make sure you are buying from a reliable supplier who offers superior quality products, as you should never compromise in this spectrum. Let the development bring you benefits.
Hence, one must consider both pros and cons of the micromotor unit before investing.