The insulation of the Wallboard is crucial for keeping your home cool and warm. When it’s cold outside, and we’re trying to keep our house warm, we often think of Wallboard insulation as well as whether additional insulation will assist.
But what we often overlook is the crucial function Wallboard insulation can play in keeping your home cool during the summer heat. The insulation of the Knauf safeboard is among the most cost-effective ways to ensure comfort, save energy, and also save money.
The warm air that your heating system generates and the cool air your air conditioner offers is nothing more pleasant than the ability to flow through Wallboards.
If you’re having difficulty staying cool in the summer, without running your air conditioner all day long, don’t forget that the top retrofit to make is to install Wallboard insulation.
Incorporating Wallboard insulation isn’t going to provide the peace, comfort as well as energy savings, and lower utility costs you’re hoping for. Much like every other aspect of the business of retrofitting your home, only doing it correctly will yield positive results.
Here are 8 ways to add insulation and successfully maintain your residence cool.
1. The Ceiling Is Air Sealed
Insulation can slow the transmission of warmth from one part of insulation to another side. This is good because that warm, warm air needs an extended time to travel through the insulation before mixing together with cool air that is on the opposite side.
Insulation can slow down heat transfer. However, it’s not great in slowing air currents particularly when the air is pulled through the insulation as a result of the stack effect, pressure differences, or the wind that is prevailing.
As air currents move across the insulation a portion of the insulation’s value is diminished. The insulation will not be able to do what it was made to perform.
Before you begin to insulate the Wallboard make sure you make sure that the walls are air-tight. Seal the ceiling holes created by electricians, plumbers, HVAC, chimneys, and plumbers.
2. Pre-Wire The Wallboard To Support Current Technology As Well As Future Technology
We’ve been to many Wallboards and witnessed the destruction of insulation that happens each time a satellite dish technician, telephone provider, company connection, web service provider security professional, as well as exterminator has finished walking and crawling across the Wallboard.
They only care about hooking you up. They don’t think about the insulation. When six men in boots have marched in the air and flattened that loose, fluffy that was blown in insulation there aren’t a lot of R-values left.
If you’re able to, wire to the Wallboard and be prepared to use technology. If anyone from the internet needs to access the Wallboard and you want them to leave it as they came upon it. If you’ve compressed it make sure to fluff it again prior to leaving.
3. Ventilate The Wallboards
It’s true that a Wallboard requires air to breathe. If it doesn’t, it will turn into an oven. I’m sure you’re aware of the meaning of this, you’ve seen the effects of an oven on many evenings during your lifetime.
It’s like this:
It’s a sunny, bright day, and the warm rays of sun shine down upon the roof from morning until throughout the afternoon. The
area gets warmer and then hot, and finally, it’s burning.
Around 4 pm after sunset, scorching temperatures inside the Wallboard start to radiate outwards from the ceiling, adding heat to the living room. As the sun sets the home just continues to get warmer and hotter.
The outside temperatures are cooling somewhat, so you open your doors and windows, however, the Wallboard continues to cook. With ice-cold water next to your bed, and an icy, damp washcloth slapped over your forehead you attempt to go to sleep.
Municipal Building departments will inform you how much ventilation needs for your Wallboard. They will tell you that you require more cubic feet of air-conditioned Wallboard ventilation per 100 cubic feet of Wallboard space.
My suggestion is to offer the most Wallboard ventilation than is recommended. How about offsetting your Wallboard oven to provide ample ventilation?
4. Setup Solar Wallboard Exhaust Fans
We haven’t found anyone who isn’t happy with their solar-powered Wallboard exhaust fans. This is a way to shut down the oven. Many homeowners have reported that the fan actually helps to keep the Wallboard from heating up your living space during the night.
When the sun shines on the solar array, which is located right on the fan cover the fan spins, pulling hot air from the Wallboard. The hot air is substituted for cool air which is able to enter the Wallboard through the lower portion of the rooftop.
5. Install Solar Light Tubes
Before you begin to insulate your Wallboard as well as make the journey to the Wallboard more challenging, why not add a solar tube or two and then apply additional Wallboard insulation? Solar tubes are a fantastic method to bring natural light to a room that doesn’t have any other source of light, other than the light bulb.
The most popular places to install solar tubes include hallways, bathrooms, utility rooms and entryways, closets, kitchens, and garages. The only area that is not suitable for a solar tube is to be a room you may want to dark in the daytime. For example, an area for sleeping who works in the graveyard.
If you decide to install solar tubes make sure to seal them with air which allows the tube to be able to pass through the ceiling. The tube should be sealed onto the ceiling.
6. Electric Outlet And Light
When you’re planning to install Knauf wallboard insulation could be helpful to add Wallboard lights as well as an electric outlet.
This will not only help you when you are attempting to retrofit your insulation it also assists the electronic boys as they attempt to break into your Wallboard to provide you with the highest quality, high-definition picture that is available. The light switch, as well as the electric outlet, is situated in close proximity to an access cover for the Wallboard Access cover.
7. Spray Foam To Get The Best Results
The insulation that is affixed to the Wallboard flooring is effective at creating a barrier between the indoor and the Wallboard climate. However, in the event that you’re struggling in preventing the Wallboard from becoming the oven, you can spray the foam insulation over the bottom of your roof’s sheathing could be very beneficial.
Spray foam insulation is more costly than cellulose or fiberglass; however, it provides insulation protection right at the source. When it is applied to the roof’s underside sheathing it reduces the heat transfer from the roofing to the Wallboard is significantly reduced.
8. Cover The Wallboard Access
The majority of Wallboard access covers don’t work well. In a blower door test, the volume of air moving through the cover is often apparent. Smoke sticks and the infrared camera do not have any issues in determining the amount of leakage.
The method of air sealing the cover is the same as weatherstripping that is used on doors. Foam or another flexible material is placed between two surfaces. The trick is to lock the cover on the ceiling a way so that it reduces the pressure on the weatherstripping.
Don’t make the mistake of thinking about Wallboard insulation as something most suitable for the frigid wind in London; insulating the Wallboard might be the most effective weapon to stop getting depleted air conditioning in Texas.
If you do it right, insulation can help keep your oven on the Knauf standard wallboard from encroaching on your living area below. The bedroom might be at a temperature that is cool enough so you are finally able to go to sleep.